Is $6,000 Too Much for a 200 Amp Upgrade?

TL;DR

Quick Answer

$6,000 is above our current national reference range for a typical 100A to 200A upgrade, but that alone doesn't mean the quote is overpriced. A full service upgrade that includes meter base replacement, service entrance conductors, mast/weatherhead work, or other added scope can reasonably cost more than a straightforward panel swap.

The comparison

How This Quote Compares

Here's how a $6,000 quote lines up against both of the scopes we have researched reference data for.

Panel replacement only

Significantly Above Reference Range

Reference range: $1,300–$2,000

+200%

above the top of this range

Your quote is well above the reference range. We'd recommend getting at least one more quote before moving forward.

Full service upgrade

Significantly Above Reference Range

Reference range: $1,300–$3,000

+100%

above the top of this range

Your quote is well above the reference range. We'd recommend getting at least one more quote before moving forward.

Estimated national reference range: This is an estimated national reference range based on early (V1) research — not a guaranteed local price. Actual costs depend on your specific project and location. Comparing total price alone can be misleading when contractor scopes differ — the two cards above show why the same dollar figure reads very differently depending on what's included.

Possible added scope

Why a 200 Amp Upgrade Can Cost More

A $6,000 quote sits well above both reference ranges — roughly double the top of the full-service range. A higher quote like this may reflect several additional scope items working together rather than a single factor, depending on the property and project:

Meter equipment: Upgrading or relocating the meter base, or coordinating a meter swap with your utility, adds cost beyond the panel itself.
Service entrance conductors: Larger conductors between the utility connection and your panel are often required to safely carry 200A.
Mast/weatherhead: If the mast or weatherhead where the service line attaches to your home isn't rated for the new capacity, it needs to be replaced.
Utility coordination: Some projects require scheduling a power disconnect and reconnect with your utility company, which adds time and cost.
Underground service/trenching: If your service run is underground, trenching and conduit work typically cost more than comparable overhead work.
Permits and inspections: Permit fees and inspection requirements vary by municipality and are sometimes billed separately from labor.
Grounding: Bringing grounding and bonding up to current code is a common — and sometimes underestimated — part of a compliant upgrade.
Panel relocation: Moving the panel to a new location adds conduit, wiring runs, and labor beyond an in-place replacement.
Code corrections: Older installations sometimes need corrections to meet current code before a new panel can pass inspection.
Additional rewiring: If existing wiring is undersized, damaged, or non-compliant, rewiring parts of the home can add significant scope.

Read the fine print

What to Look for in Your Electrician Quote

Ask for a written breakdown that separates labor, materials, permits, and any utility fees.
Confirm explicitly whether the quote covers a panel replacement only or a full service upgrade.
Ask which of the additional-scope items above — meter, service entrance, mast, trenching, and so on — are included.
Check whether the price assumes your existing wiring and grounding are already up to code, or includes bringing them up to code.
Ask what happens to the price if something unexpected is found once work begins.

Know your scope

Panel Replacement vs Full Service Upgrade

If your $6,000 quote is for a full service upgrade — one that includes meter base replacement, service entrance conductors, mast/weatherhead work, and utility coordination — the price starts to make more sense, especially with permits/inspection, grounding/bonding, panel relocation, code corrections, or underground/trenching work layered on top. If it's meant to be a straightforward panel-only replacement, $6,000 is a large gap and deserves closer review and comparison with other licensed electrician quotes.

Panel replacement only

$1,300–$2,000

A panel-only replacement swaps the panel enclosure and breakers, assuming your existing meter and service entrance can already handle 200A.

Full service upgrade

$1,300–$3,000

A full service upgrade also replaces the meter base and service entrance conductors — and sometimes the mast or weatherhead — because the actual capacity coming into your home has to increase too.

Before you sign

When Getting Another Quote Makes Sense

Because $6,000 is well above range but could still reflect a legitimate full-service scope, getting a second quote is a smart way to double-check — especially if your electrician can't walk you through what's included point by point.

Ask your current electrician for a full itemized breakdown before seeking another quote — the explanation may already be there.
Get quotes from one or two other licensed, insured electricians for the same clearly defined scope of work.
Make sure every quote you compare covers the same scope — panel replacement only vs. full service upgrade.
Ask each electrician what would change the price once they've seen your existing panel and service entrance in person.

Check my quote